STANDARD PV MODULE
210W High-Efficiency Module
210W N-Type Bifacial Solar Module
CS210W
CN210W
Key Engineering Advantages
Delivers up to 210W of power
Achieves 25.6% cell efficiency
Provides up to 30% bifacial gain
Maintains output under partial shade
Uses reliable N-Type 16BB cells
Supports 12V and 24V systems
TECHNICAL SPECIFICATIONS
CS210W datasheet
ELECTRICAL
- MAXIMUM POWER
- 210W
- Vmp / Imp
- 34.2V / 6.1A
- Voc / Isc
- 40.3V / 6.5A
- CELL EFFICIENCY
- 25.6%
- SYSTEM CONFIGURATION
- Suitable for 12V and 24V systems
- MAXIMUM SYSTEM VOLTAGE
- 1500 V DC
- MAXIMUM SERIES FUSE
- 25 A
- OPERATING TEMPERATURE
- -40°C ~ +85°C
- STANDARD TEST CONDITIONS
- 1000 W/m² · 25°C · AM1.5
MECHANICAL
- CELL TYPE
- N-Type · 16BB · Mono-crystalline Silicon
- DIMENSIONS
- 1376 × 766 × 35 mm
- WEIGHT
- 11.3 kg
- GLASS
- 3.2 mm tempered glass
- FRAME
- Anodized aluminium alloy
- IP RATING
- IP68
- WIND / SNOW LOAD
- 2400 Pa / 5400 Pa
- CONNECTOR
- Solar connector
- MOUNTING
- 12 mounting holes
TEMPERATURE & DELIVERY
- CIRCUIT DESIGN
- Dual-module parallel circuitry
- PMAX COEFFICIENT
- -0.30%/K
- VOC COEFFICIENT
- -0.25%/K
- ISC COEFFICIENT
- +0.045%/K
- FIRST-YEAR DEGRADATION
- 1%
- LINEAR DEGRADATION
- 0.4% per year
- 25-YEAR OUTPUT
- 89.6%
- PRODUCT WARRANTY
- 10 years product · 25 years linear power
- APPLICATIONS
- RV · Marine · Roof · Off-grid
STC: Irradiance 1000 W/m² · Cell temperature 25°C · Air mass 1.5
WhatsApp Scan to chat with us FAQ
CS210W — frequently asked questions
Why is the CS210W recommended for 24 V systems?
Its dual-module parallel circuitry with quarter-cut cells delivers Vmp 34.2 V / Imp 6.1 A (Voc 40.3 V) — a deliberate design for reliable 24 V charging with common MPPT controllers, even under partial shade.
How does partial shade affect this module?
Less than conventional designs: the parallel section architecture isolates shaded areas, so output scales with the unshaded proportion rather than collapsing — valuable on boats and wooded cabin sites.
What applications is it built for?
RVs, marine decks, off-grid cabins and solar generators — anywhere 24 V reliability under partial shade matters and a 1376 × 766 mm rigid module fits.
Can it also run 12 V systems?
Yes — through an MPPT controller that down-converts to 12 V; the 24 V-class output gives headroom for long cable runs and hot-weather voltage drop.
What mounting dimensions should I prepare?
Plan for a 1376 × 766 mm module, 35 mm thick, 11.3 kg — with mounting holes compatible with standard rigid-mount rails.
DOCUMENTS & INQUIRY
CS210W product resources
IEC 61215 · IEC 61730
ISO 9001:2015 · ISO 14001:2023 · ISO 45001:2023